Brand new stator- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- All product shipped are tested
We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues. *All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part. Specifications: Dimensions : Interior diameter : 53 mm Exterior diameter : 113 mm Thickness : 19 mm Length of wires stator to grommet : 180 mm Length of wires grommet to plug : 390 mm Length of pickup coil\'s wire to grommet : 59 mm Other specifications : Number of wires : 7 Number of plugs : 2 Number of pins : 7 Number of poles : 14
Wire to wire resistance : Source 1 : Green to Black = 300 ohms+/-20% Pick up 1 : Red to White = 500 ohms+/-20% Alternator : White Between each White = 0.9 ohms+/-20% Alternator : White to Ground = O.L. ON DISPLAY Warning: Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced. |